Remote Sensing Report Essay Example | Topics and Well Written Essays - 1750 words

Remote Sensing Report - Essay Example The NDVI varies from -1.0 to 1.0 for every pixel in a representation and is vital in discovering regions of ranging levels of plant biomass/dynamism. This means that higher values symbolize high biomass/dynamism. The vegetation indices normally depend on the actuality that green vegetation indicates an authentic combination of low reflectance at perceptible red wavelengths and elevated reflectance at near infrared wavelengths. In similar manner, a ratio of close to infrared (NIR) by red  ® light will issue out an approximation (RVI) of the amount of green vegetation present in every pixel. These therefore may be computed as follows: RVI=NIR/R This ratio is well known as the â€Å"Ratio Vegetation Index† thus the notion RVI. The ultimate aim of this report is to examine how the ratio vegetation index is computed using Lake Nakuru in Kenya as example. It also looks at the unsupervised and supervised classification and examines their advantages and disadvantages. Part 1: Vegeta tion Indices Methodology The methodology used in this research is a fieldwork quantitative analysis carried out on the vegetation structure of Lake Nakuru. The ratio vegetation index is calculated where all the steps involved are indicated. Quantitative analysis is one of the best fieldwork methodologies that provide accurate results that are reliable in conclusions and decision-making processes. Analytical Steps The steps for calculating the ration vegetation index are as follows The first step is calculating a ration vegetation index from Landsat TM Data This means that the computed ratio vegetation index (RVI) for the Nakuru Thematic Mapper (TM) representation. For Landsat Thematic Mapper data, the band 3 gauges red, light as TM band 4 gauges near infrared. Lake Nakuru is a little shallow alkaline lake situated south of Nakuru town in Kenya. It is a small lake but it is the world’s most famous place where the greatest bird sight on earth. It is where more than one million pink flamingos gather to the lake to eat the excessive algae, which flourishes in the warm waters of the lake (Jones, Settle and Wyatt, 2006). Scientific scholars have approximated that the population of the flamingos at Lake Nakuru uses about 250, 000 kg of algae per hectare of surface area every year. However, it is not only the flamingos found at Lake Nakuru although they are the most abundant; Pelicans and cormorants are also present in large numbers. In reality, Lake Nakuru is actually a home for more than 400 different species of birds, which means that it is the leading place with variety of bird species than any other place in the country. The second step is adding color to the Ratio Vegetation Index representation (Bonner, Rohde and Miller, 2001). This is done through reloading the Nakuru image although this time one clicks on the raster options tab to add dialog and show as a pseudo color image. Then select raster/Attributes on the viewer menu bar for Nakuru-rvi.img. The f ollowing raster editor should be displayed Select edit/colors from the Attribute Editor Menu. The following color Editor should be displayed: From this color tab, try changing different colors at the start and end colors, and choose the Apply button. The Nakuru-rvi.img representation has to change color. Try

Event analysis Essay Example | Topics and Well Written Essays - 500 words - 1

Event analysis - Essay Example However, one evening the warehouses and storage manager forgot to switch-on the refrigerating system before installing fruits and vegetables which lead to spoilage. One possible solution to the problem is through the context of change management. Management change is currently one of major domains of organisational research, and the study of organisational change has become one of the major aspects in being able and helping to measure the organisation performance; efficiency and effectiveness. It is important to understand the extent to which formal changes in management systems and role prescriptions have resulted in change in work behaviour and job satisfaction experienced by personnel (Manser, 2004). It is thus essential, when attempting to assess the impact of formally espoused changes within an organisation, to examine the extent to which, and the way in which, managers have adapted new forms of work behaviour in accordance with the new managerial role perceptions. According to Waters (1996) ever since people started to work together to reach a common goal, operations management has been an important ingredient, but since the industrial revolution, it has grown most rapidly. Operations management is the tool behind the technical improvements that makes production efficient. It is the way to plan and organize how the technology and machinery will be utilized the most. The productivity in an organization depends on both the right technology and the right way to manage it (Waters, 1996). However, TQM can be a success or failure depending on how well it is planned, implemented, measured, and encouraged. Few would disagree that continuous improvement offers substantial benefits for manufacturers (McNamara, 1999). As a basic tenet of TQM, continuous improvement can enable manufacturers to meet the competitive pressures of the global economy head-on, and to develop strategies for

Profile Toxicology Term Paper Example | Topics and Well Written Essays - 3250 words

Profile Toxicology - Term Paper Example Pb (23.5-27%), 207 Pb (20.5-23%) and 204 Pb (1.35-1.5 %).These isotopes are the stable decay product of three naturally radioactive elements : 206 Pb from Uranium, 207 Pb from actinium and 208Pb from thorium(Agency for Toxic Substances and Disease Registry (ATSDR), 2005) . Lead rarely exists as a metal, but rather, in combination with two or more elements to form Pd compounds. The element has three oxidation states (0 or the metal state, +2 and +4), the most common oxidative state being +2. Lead generally exhibits has amphoteric properties; +2 (basic) and +4 (acidic) (APHA, 1999). Lead is an element that naturally occurs in the earth’s crust. Ore deposits of Pb include galena (PBS), anglesite (PbSO4) and cerussite (PbCO3). Anthropogenic sources of Pb in the environment , include : homes (household dust, peeling of lead-based paints, toys, furniture, table ware etc.), contaminated food (food grown in Pb-contaminated soil or sprayed with Pb insecticides), soils and dust (flaking or weathering paint, improper renovation and disposal of building materials, roadside - contamination from leaded gasoline, settled dust from industrial sources), water (leaded pipes or connectors and lead- lined tanks), and air (industrial emissions from smelters, incinerators, manufacturing operations, recycling efforts, and leaded gasoline) (Davies, 1995). Historically, Pb was widely used in plumbing, as anti-knock agent in petrol, and as an addictive in paints. However, these uses have recently reduced due to environmental concerns about cumulative lead poisoning. Presently, Pb is used in storage batteries , paints, pigments and colored inks as shielding from radiation, e.g., in x-ray rooms and nuclear reactors. Lead is also used as cable covering, as ammunition, as electrodes, in solder and roofing material.(Martiez , Nagae , Zaia , & Zaia 2004). The fate and behavior of Pb in the environment is quite complex because of the many compounds of Pb and that can be found and the

Choose one of the topics below Research Paper Example | Topics and Well Written Essays - 2000 words

Choose one of the topics below - Research Paper Example It is paramount to shift to energy sources that can substantially reduce the CO2 emissions as compared to fossil fuels rather than restricting energy saving portfolios in order to realize a reduction of greenhouse emissions. Renewable energy strategy is the best approach to reducing the emissions. According to the International Energy Agency (IEA), to reach the ultimate goal of greenhouse gas emissions worldwide, including the developing countries, strategic renewable energy sources should be implemented. Nuclear power generations and fossil fuel-fire d power generations with CO2 storage and recapture measures should be put in place to fast track counter global warming (IEA, 2008). Renewable energy is an inexhaustible energy that is a flow-type and is environment friendly. This proposal will presents some analytic findings of renewable energy outputs towards a low carbon society. It goes further to provide the nature policies on the promotion of renewable energy, measures to overcome non-economic barriers for the adoption, future courses of electricity demand-supply system, cost and effects of promotion of renewable energy and the ways to allocate related costs (IEA, 2008). The leading renewable energy producer in North America is Ontario. This renewable energy is beneficial since it does not bring about environmental degradation or pollution. Different methods of producing such energy include harnessing of wind energy through the use of windmills, harnessing of biogas or through the harnessing of solar energy. Electricity harnessed through solar energy directly depends on the energy from the sun and its intensity. Hence, different states that rely on solar energy try to determine solar insolation annually in order to optimize their electricity production during high insolation periods and subsidize their electricity during low insolation periods. There are different methods of

Project Analysis Report Research Paper Example | Topics and Well Written Essays - 1500 words

Project Analysis Report - Research Paper Example The following report presents an analysis on a project from its planning, implementation and performance together with other crucial elements of a project. The project is Computerized Passenger Reservation System by the Indian Railways. The project was successful developed, designed and implemented as attributed by the high level of management, experienced vendor, CMC, slow hurrying among other strategic techniques that the company employed. Introduction Success of a project depends on several things such as evaluation of risks and opportunities and knowing how to utilize the outcomes for the benefit the project, as well as effective project’s objective definition, planning and management. A project manager plays a key role in project planning, execution and implementation; thus, they are tasked with the obligation to search for new strategies and ensure a strategic project. The following report presents an analysis on a project from its planning, implementation and performanc e together with other crucial elements of a project. The project is Computerized Passenger Reservation System by the Indian Railways. Overview of the Project and Objectives The establishment of railway transport in India started in 1851, and by 1901, there were 24 million passengers using railway transport managed by GIPR Company. 42 railway companies operated in India during the colonial era, but after independence, they were all merged and operated by the government (Raman & Wig, 2010). Since then, the company has improved on the number of passengers carried per year, as well as the carriages and the railway lines. The Indian Railways is divided into 17 zones for effective management with several divisions. The divisions also encourage sports and operate hospitals and schools for employees. PRS system that was designed from scratch has been labeled the most successful project done by the Indian railways. The objective of this project was to transform passenger reservation system i n order to handle the huge magnitude of passengers and complexity of the transactions. Analysis of scope of the project shows that is was divided into four stages, which were initiation stage, project stage, implementation stage and growth stage. The initiation stage comprised feasibility studies and the decisions that piloted the approval, as well as funding of the PRS project. The major activities at this stage included creating the need for the PRS, approving schedule and budget and identifying management team for the project (Raman & Wig, 2010). The second stage was the project stage, which constituted activities for startup of the project. Activities in this stage were vendor and hardware selection, systems design, integration, testing, software development, data conversions, manual procedures redesigning and finally, roll-out. The third stage of the project scope was the implementation stage where the organization accepts PRS and puts it into use. As such, this stage was fulfi lled by carrying out activities such as rework, debugging system and software, staff training and system performance tuning. Lastly, growth stage came fourth on the scope of the project, and this is where the organization established plans to further investment in infrastructure to support the technology. In addition, the organization also extended the new system’s use to other areas, as well as developed additional applications to be linked with the system. Stakeholder Analysis The major

Animal Cruelty Essay Example for Free

Animal Cruelty Essay To bring awareness to my audience about animal cruelty. Introduction: As humanity has grown, there has been an increase in authority and rules and regulations of everyday life. One of these rules is animal cruelty. Animal cruelty simply means cruel unjustified treatment of animals and sometimes pets to unnecessary harm and pain. One principal type of animal cruelty is torture. It is not ethical, moral, or legal but we humans do it.. One of the places we see the most animal cruelty is in the circuses. Animals in circuses are regularly and dangerously exposed to many abuses and diseases. Circuses do not practice what they preach and indulge in animal cruelty on a regular basis, after the training sessions of the circuses, tight collars, whips; beatings and torture are the order of the day for these animals. Elephants are one of the animals that suffer from major diseases in the circuses like tuberculosis and can infect humans with the bacterial disease. Some cases show that the elephants were not cured medically for wounds caused during beatings and other natural causes. Circuses have known to keep a large amount of soil ready, to hide the wounds and the blood on the elephants. Some elephants have also suffered from lameness, arthritis and food abscesses. Elephant deaths in circuses are normally caused due to osteoporosis. Elephants suffer from Osteoporosis simply because they do not have wide spaces to move around. Due to the cruel treatments, it has been proved that circus animals are dying at a higher rate than they are breeding. Circuses teach children that its acceptable to abuse and mistreat animals for amusement Another animal cruelty is with dogs, people seem to think that fighting is a dog’s nature. Dogs are not the same as humans, but dogs do feel physical pain. Just because a dog cant say That hurts! doesnt mean they dont feel pain. Dogs also suffer from feelings such as loneliness when left chained. Thats why they howl and bark, to try and get some attention and if they are ignored dogs stops howling, its because hes given up hope. So much cruelty is involved in dogfighting. Dogs are tortured to make them violent. Kittens and puppies are used as bait to teach dogs to kill. Illegal drugs and weapons are usual at dogfights. Fighting dogs usually live on chains their whole lives. Other animal cruelty we see is when they make experiments on animals, like monkeys, mouse, gineapigs etc. Monkeys and others animals do not have identical immune systems as humans, and may not respond to drugs or vaccines in the same way. Animals are often depressed alternatives for humans, and some mixtures that may well cause no harm to an animal, could seriously harm a human being. Also, a drug that is toxic to the animal it is tested on may have no toxicity, and even healing benefits in humans. Pain and suffering still occur, and simply being in captivity can cause great distress to animals, just as it would to a human. We most of the times forget the pain and suffering we are causing to animals, we use them as objects of study, rather than live creatures, and this can mean they are treated as disposable rather than indispensable.

Strategy For Sustainable Construction 2008

Strategy For Sustainable Construction 2008 According to OGC Guide (2003), sustainability includes environmental, social and economic factors, and construction affects all three areas. HM Treasury launched a three-year Sustainability Action Plan in June 2000 which sets out how the government client would take forward the sustainable development agenda through better procurement of new works, maintenance and refurbishment. The Strategy for Sustainable Construction aims to achieve sustainable construction through procurement, good design, innovate the construction process, continuous professional development of people, better regulation, climate change mitigation, climate change adaptation; reduce per capita consumption of water, enhancement of biodiversity, reduction of construction waste to landfill and using materials having least environmental and social impact. (HMG, 2008) According to Glover (2008), the following points should be taken into account while drafting construction contracts Identify the client and principal contractor; Identify who is responsible for complying with the regulations and drafting and updating the SWMP; Decisions in relation to sustainability provisions; Identify the different types of waste that will be produced in the course of the project and describe what waste management action will be taken; Identify who is responsible for removing the waste Construction Projects and contracts are already subject to certain sustainability provisions like clause 4.18 of the FIDIC Red Book entitled Protection of the Environment. Similarly, clause 16 of the JCT 2007 form states that the provider will assist the employer and the other project participants in exploring ways in which the environmental performance and sustainability of the Tasks might be improved and environmental impact reduced, for instance, selection of materials and adoption of construction techniques which result in reductions in waste. The wording of Clause 16 of the JCT 2007 form is similar to paragraph 56 of JCT Framework Agreement Guide. The government has introduced a number of legislative provisions like Site Waste Management Plans Regulations 2008, Energy Performance of Buildings Regulations 2008, Housing and Regeneration Act 2008, Landfill Tax and Code for Sustainable Homes 2008. (Glover, 2008) Having identified sustainability as a key issue, the JCT conducted preliminary discussions with senior industry figures. As a result of those discussions, the JCT launched a consultation, to deal with sustainability in construction contracts and ultimately the issue of how sustainability should be addressed in JCT contracts. The findings of the consultation were published in a guidance notes called Building a sustainable future together. It revealed that detailed requirements should be contained in the project specification rather than in the contract. The guidance notes also sought to address the feeling amongst participants that guidance was needed for tackling sustainability in contractual documentation. (Law-Now, 2009) The incorporation of suitable provisions in guidance notes or clauses in construction contracts offers the clients to incentivise to improve sustainability. Areas for possible inclusion under the heading of sustainability, are: sustainability targets, desired levels of energy, and water use; targets for waste minimisation and recycling; requirements for use of materials that come from sustainable sources; targets for health and safety of the workforce on site; targets for training and appropriate skills levels; requirements for use of up-to-date integrated supply chain methods including improved logistics and use of logistics plans; and targets for improved working conditions for staff both on and off site. Considerations on the transport side, both for bringing staff on site and bringing materials to the site will also be important to the overall carbon footprint of the project. (JCT Consultation Paper, 2008) Sustainability Objectives have to be reflected in the employers requirements and carried through into contract drafting. There are already a number of existing contractual provisions in many standard form contracts which can be tailored to address sustainability, for example, clause 2.15 of JCT 2005 Design and Build regarding Changes of law. A mechanism similar to liquidated and ascertained damages can be an effective means of ensuring delivery of sustainable requirements. Use of clear objectives and deliverables linked to a compensation mechanism is the key to delivering sustainable development through contract drafting. (Douglas and Oats, 2008) The principal purpose of Revision 2 is to recognise the increasing importance of sustainability and to provide a flexible framework. The sole alteration has been the insertion of the new Seventh and Eighth Recitals (Framework Agreement and Supplemental Provisions). Entries are provided against the references to them in Part 1 of the Contract Particulars. The default position for each Supplemental Provision is that it applies unless otherwise stated. (JCT Guide, 2009) The sustainability wording encourages the contractor to suggest economically viable changes to the works, which might result in environmental benefits to the works and requires the contractors to provide the employer with information on the environmental impact of the materials they select and use. (Law-Now, 2009) JCT SBC 05 has fall-back provision regarding sustainable development, which is according to clause 2.1 which deals in compliance with the contract documents, the construction phase plan and the statutory requirements. The key to sustainable construction is that the sustainability provisions are incorporated in the design and specification. In sustainability terms (as with any contract), there are two questions that need to be asked which are, what is the loss and what are the ordinary standards applicable when asked to incorporate sustainability provisions. (Glover, 2008) Under the Society of Construction Law Delay and Disruption Protocol, it is possible to build sustainability provisions into the definition of practical completion i.e. a project is not complete unless certain sustainability standards have been achieved. The contractor might require the addition of a new relevant event under clause 2.29 of the JCT Standard Building Contract to account for the risks of such provisions. Clause 2.29.12 already deals with the risks of a change in the law i.e. the introduction of new environmental regulatory provisions. The client and the contractor have to decide who carries the risk for increase in prices of commodities for sustainable construction. (Glover, 2008) According to Glover (2008), the collateral warranty in terms of sustainability can be stated as The consultant warrants and undertakes to the employer that it has and will continue to use reasonable skill and care that it shall endeavour at all times to specify for use materials from the BRE Green Guide to Specification. To conclude, the JCT seems to be deciding between Aspirational clauses and specific obligations. The key to incorporating sustainability provisions into your contract lies with getting your specification right. When it comes to enforcing that specification, there are two options. Firstly, monitor the performance of the contractor through the use of Key Performance Indicators, which must of course be agreed in advance. Secondly, make sure that the achievement of practical completion is linked to the achievement of the sustainable goals you want incorporated into your project. (Glover, 2008) 2. According to NEC3 clause 10.1, the Employer, the contractor, the project manager and the supervisor shall act as stated in the contract and in the spirit of mutual trust and co-operation. This is similar to JCT 05, Schedule 8 (Eighth Recital) paragraph 1, which states that the parties shall work with each other and with other project team members in a co-operative and collaborative manner, in good faith and in spirit of trust and respect. In the NEC3, when Option C, D, E F are used, Clause 20.3 states that the contractor advises the project manager on the practical implications of the design of the works and on subcontracting arrangements. Clause 20.4 states that the contractor prepares forecasts of the total defined cost for the whole of the works in consultation with the project manager and submits them to the project manager. According to NEC3 clause 25.1, the contractor cooperates with others in obtaining and providing information which they need in connection with the works. According to NEC3 clause 40.3, the contractor and the supervisor each notifies the other of each of his tests and inspections before it starts and afterwards notifies the other of its result. These clauses illustrate the collaborative working environment. (Telford, 2008) JCT SBC 05 contains an express undertaking to comply with the statutory requirements and Construction Phase Plan in clause 2.1 which covers Health and Safety legislation. According to clauses 3.23 and 3.24, the contract also makes provision with respect to the CDM Regulations and a CDM Co-ordinator as well as a Principal Contractor is appointed by the Employer. The Part 2 of the CDM Regulations sets out the duties of clients, designers and contractors. According to JCT 05 Schedule 8 (Eighth Recital) paragraph 2, the parties will endeavour to establish and maintain a culture and working environment in which health and safety is of paramount concern. This supplement provision adds an obligation to comply with non-statutory HSE and HSC codes. (JCT Guide, 2009) This is similar to NEC3 clause 27.4, the contractor act in accordance with the health and safety requirements stated in the works information. It is necessary to include in the contract any particular requirements which the employer has and are in parallel with statutory requirements. These requirements may include such matters as the safety regulations of the factory, a health and safety plan for the whole site, submission of safety policies and which party is responsible for maintaining areas used by several contractors in a safe condition. (Telford, 2008) Also, clause 91.3 of NEC3 deals with the termination of the contractor in substantially breaking a health and Safety Regulation. For further reading on Health and Safety issues, there is a guide on Health and Safety in the Achieving Excellence suite which identifies how client decisions and activities impact on health and safety. (OGC, 2003) According to NEC3 clause 16.1, the contractor and the project manager give an early warning by notifying the other as soon as either becomes aware of any matter which could increase the total of prices or impair the performance of the works. Also, the intention of clause 16.3 in NEC3, regarding risk reduction meeting is to take action or make decisions which avoid or mitigate the effects of identified risks on cost, quality and time which helps in saving cost. The concept of Contractors share is used in Option C D of NEC3. The purpose of the Contractors share is to encourage effective management control of the final Price of Work Done to Date relative to the target i.e. for saving cost and value improvements. (Telford, 2008) The clause 63.10 of NEC3 deals with the reduction of price if the effect of the compensation event is to reduce the total defined cost. Similarly, the intention of clause 63.11 is to encourage the contractor to apply value engineering principles to the works inf ormation and save cost and improve value. (Telford, 2008) This is similar to JCT 05 supplement provision Schedule 8 paragraph 3, according to which, the contractor is encouraged to propose changes to designs and specifications for the works and to the programme that may benefit the employer in the form of reduction of cost of the works. It is during the pre construction phase that most value improvements are derived by value engineering exercises. Further opportunities for value engineering exercise arise in context of variations where cost saving can be done. (JCT Guide, 2009) For further reading, there is a guide on Whole-life costing and cost management in Achieving Excellence Procurement Guide suite which provides advice on producing whole-life cost models and explains what needs to be done to keep costs under control at key stages in the project. (OGC, 2003) Sustainability Development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs. (Glover, 2008) According to JCT 05 supplement provision Schedule 8 paragraph 4, the contractor is encouraged to suggest economically viable amendments to the works which may result in an improvement in environmental performance in the carrying out of the works and the contractor shall provide all such information that the employer requests regarding the environmental impact. According to clause 2.3 and clause 2.9, the JCT has taken an active role in establishing the importance of proper information being available on the environmental impact of materials and goods selected by the Contractor. (JCT Guide, 2009) Also, JCT SBC 05 has fall-back provisions regarding sustainable development, which is according to clause 2.1; the contractor shall carry and complete the Works in a proper and workmanlike manner and in compliance with the contract documents, the construction phase plan and the statutory requirements. This is similar to NEC3 Option X2 regarding Changes in the Law. Any legislation or regulation by the government regarding sustainable development can be incorporated in the NEC3 through this clause. As well as Option Z can be used in NEC3 to incorporate sustainable construction in the contract by adding additional conditions to the contract. Performance can be measured by Standard Key Performance Indicators, Post-project implementation reviews and Client performance surveys. The Improving Performance: project evaluation guide as well as benchmarking can be used to measure performance throughout the life of the project. (OGC, 2003) According to NEC3 Option X20, the contractor reports to the project manager his performance against each of the Key Performance Indicator (KPI) stated in the Incentive Schedule and if the target is not achieved then the contractor submits a proposal to the project manager for improving his performance. If the target is achieved or improved then the contractor is paid the amount stated in the Incentive Schedule. Also, the employer may add a Key Performance Indicator and associated payment to the Incentive Schedule. (NEC3, 2008) This is similar to JCT 05 supplement provision Schedule 8 paragraph 5, according to which, the employer shall monitor and assess the contractors performance by reference to any performance indicators stated in the contract particulars and where the employer considers that the target may not be met, he may inform the contractor who shall submit his proposals for improving his performance. Another feature of NEC3 Option X17 is that, if a defect included in the defects certificate shows low performance with respect to a performance level stated in the contract data, the contractor pays the amount of low performance damages stated in the contract data. The performance of the contractor is certified by the supervisor following a specified performance test to be carried out between completion and defects date. (Telford, 2008) In JCT 05, according to Section 108 of the Housing Grants, Construction and Regeneration Act (HGCRA) 1996, a construction contract should enable a party to give notice at any time of his intention to refer a dispute to adjudication. If a dispute arises, the parties should consider whether to allow a reasonable period for negotiation before recourse to adjudication or other external means of resolving the dispute. (JCT Guide, 2009) This is similar to NEC3 which has also incorporated HGCRA 1996 in Option Y (UK) 2. According to NEC3 clause 13.7, a notification which this contract requires is communicated separately from other communications. In NEC3, Dispute Resolution is dealt using two options namely Option W1 which is used in international contracts outside UK and Option W2 which incorporates HGCR Act 1996 and is used in UK. According to NEC3, Option W1, disputes are notified and referred to the Adjudicator in accordance with the Adjudication Table. While in case of Option W2, a party may refer a dispute to the Adjudicator at any time. According to clause W2.3, a party gives a notice of adjudication to the other party with a brief description of the dispute. Within seven days of a party giving notice of adjudication he refers the dispute to the Adjudicator, provides information and send a copy of the information to the other party. If the subcontract allows, the contractor may refer the subcontract dispute to the Adjudicator at the same time. The Adjudicator may review and revise any action or inaction of the Project Manager or Supervisor, take the initiative in ascertaining the facts, instruct a party to provide furt her information or instruct a Party to take other action. The Adjudicator decides the dispute and notifies his decision and his reasons within twenty eight days. If a party is dissatisfied by the decision of the Adjudicator, he may notify the other party within four weeks that he intends to refer it to the tribunal. The tribunal has the power to reconsider any decision of the Adjudicator. The parties can settle the dispute through arbitration as well. (NEC3, 2008) According to JCT 05 clause 9, the parties can settle the dispute in four ways i.e. through mediation by using a third party to assist the negotiation process(Clause 9.1),refer disputes to Adjudication (Clause 9.2) and the procedure is similar to NEC3, refer disputes to arbitration (Clause 9.3 to 9.8) and litigation (Article 9). According to JCT 05 supplement provision Schedule 8 paragraph 6, each party shall promptly notify the other of any matter that appears likely to give rise to a dispute or difference. The senior executives nominated in the contract particulars shall meet as soon as practicable for direct, good faith negotiations to resolve the matter. In the case of the sixth Supplemental Provision (Notification and negotiation), there is a further entry for nominated employees. (JCT Guide, 2009) Word Count: 2862 References: Issaka Ndekugri and Michael Rycroft, 2009, the JCT 05 Standard Building Contract: Law and Administration JCT Consultation Paper, 2008, Sustainability JCT 05 Standard Building Contract Guide, 2009 JCT (2009), Standard Building Contract with Quantities 2005 Jeremy Glover, 2008, Sustainable Development in the Construction Industry, Retrieved from: http://www.fenwick-elliott.co.uk/files/Sustainable%20Development%20in%20the%20Construction%20Industry.pdf (Accessed on 25th January, 2010) Law-Now, 2009, Construction industry body embeds sustainability in its standard form contracts, Retrieved from Blackboard NEC3 (2008), Engineering and Construction Contract 2005 Simon Oats and Tom Douglas, 2008, Sustainability Contracts Strategy for Sustainable Construction, 2008, retrieved from: http://www.strategicforum.org.uk/pdf/1381-Report.pdf (Accessed on 25th January, 2010) Sustainable construction, Retrieved from: http://www.berr.gov.uk/whatwedo/sectors/construction/sustainability/page13691.html (Accessed on 25th January, 2010) Thomas Telford, 2008, NEC3 Engineering and Construction Contract 2005 Guidance Notes